Nintendo Switch Controllers

Installation

First, you need to install dkms-hid-nintendo, a Nintendo HID kernel module:

git clone https://github.com/nicman23/dkms-hid-nintendo
cd dkms-hid-nintendo
sudo dkms add .
sudo dkms build nintendo -v 3.2
sudo dkms install nintendo -v 3.2

NOTE : the module version may change, check the driver's page for the correct version to be used with the dkms commands above.

Then, you need joycond, a userspace driver which manages the controllers and exposes their motion inputs.

On a fresh install, you might need to install the libevdev library first:

sudo apt-get install libevdev-dev

Then install the joycond itself:

git clone https://github.com/DanielOgorchock/joycond.git
cd joycond
cmake .
sudo make install
sudo systemctl enable --now joycond

Usage

Just like in a Nintendo Switch, after you connect it to Retropie through Bluetooth in the Retropie Menu (press the button next to the USB-C port to put the controller in pairing mode), you'll need to press triggers to select the position. After you press any button and the player indicator lights start blinking, do the following: